Silicone Rubber Cold Shrink Tube 4.3/10 Connector to 1/2″ Jumper
Cold shrink tube is a specially formulated tubular rubber sleeve pre- expanded on a removable plastic cylinder for easy installation, it does not require heat to shrink. You just need to pull the plastic cord, then the silicone rubber tubing will shrink rapidly and grip around the cable tightly, providing a reliable, long-term sealing and protection to connectors.
In certain applications, a foam tape will be needed for smaller cable diameter cannot be covered with the tube range, the foam tape is used to increase the smaller cable diameter and assure the sealing of the clod shrink tube.
Telsto Cold Shrink Splice Cover Kits are designed to be an easy-to-install, safe and fast method of covering splices on Spacer Cable. The tubes are open-ended rubber sleeves which are factory-expanded and assembled onto removable plastic cores. After the tube has been positioned for installation over an in-line splice, the core is removed, thus allowing the tube to shrink and seal the splice.
Cold shrink tubing is a fast and easy way to weatherproof a connection. Simply position the per-expanded tubing over the connection that you are protecting and pull the rip cord. The tubing compresses to form a weatherproof seal.
Telsto cold shrink tubing is designed for application in the wireless cell sites.
Many other cold shrink tube is also available. Welcome contact us for details.
Features:
1. Simple installation, requires only workman's hands
2. Accommodates a wide range of cable sizes.
3. No torches or heat required.
4. Good thermal stability.
5. Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure.
6. Excellent wet electrical properties.
7. Improved tough rubber formulation to withstand rough back filling.
8. Waterproof.
9. Resist fungus.
10. Resists acids and alkali.
11. Resists ozone and ultraviolet light.
| *All required components and instructions are provided in one kit |
| *Simple, safe installation, requires no tools |
| *Accommodate covered cables with various outside diameters |
| *No torches or heat are required |
| *Significantly reduces the time required to cover splices by traditional techniques |
| *Maintains the physical and electrical integrity of the covered conductor |
| *Includes partial tension compression sleeve |
|
Product |
Tube Inner Diameter (mm) |
Cable range(mm) |
|
Silicone Cold Shrink Tube |
φ15 |
φ4-11 |
|
φ20 |
φ5-16 |
|
|
φ25 |
φ6-21 |
|
|
φ28 |
φ6-24 |
|
|
φ30 |
φ7-26 |
|
|
φ32 |
φ8-28 |
|
|
φ35 |
φ8-31 |
|
|
φ40 |
φ10-36 |
|
|
φ45 |
φ11-41 |
|
|
φ52 |
φ11.5-46 |
|
|
φ56 |
φ12.5-50 |
|
| Remarks: |
|
|
| Tube diameter and tube length can be customized according to customer's requirements. | ||
PACKING REFERENCE:
