Products
Products
-
RF Coaxial N Male to N Male Adapter Connector
Telsto RF connector is a connector widely used in the field of wireless communication. Its operating frequency range is DC-3 GHz. It has excellent VSWR performance and low passive intermodulation. It has very stable signal transmission and excellent communication quality. Therefore, this connector is very suitable for cellular base stations, distributed antenna systems (DAS) and cell applications to ensure high-speed and efficient communication and data transmission. At the same time, the co... -
Wide-Band Directional Coupler 698-2700MHz N
Telsto Wide band Directional couplers provide flat coupling of one signal path to another in one direction only (known as directive). They commonly consist of an auxiliary line coupling electrically to a main line. One end of the auxiliary line is permanently fitted with a matched termination. Directive (the difference between coupling in one direction compared to the other) is approximately 20 dB for couplers, Directional couplers are used whenever part of a signal needs to be separated off ... -
1/2″ super flexible jumper cable DIN 7/16 to DIN 7/16 3M
Applicable for connecting feeder cables with 8TS equipment and antenna, unnecessary of additional waterproof measures, such as waterproof gel or tape, meets waterproof standard IP68. Standard lengths: 0.5m, 1m, 1.5m, 2m, 3m, customer special requirements on jumper length could be satisfied. Characteristics & Applications Electrical Spec. Vswr ≤ 1.15 (800MHz-3GHz) Dielectric withstanding voltage ≥2500V Dielectric resistance ≥5000MΩ(500V DC) Pim3 ≤ -155dBc@2 x 20W Operating tem... -
Telsto RF load terminations
Telsto RF load terminations are constructed of an aluminum finned heat sink, brass nickel plated or stainless steel,they are of good low PIM performance. Termination loads absorb RF & microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multi port microwave device such as circulation and directional couple to make these ports which are not involved in the measurement be terminated in their characteristic impedance in o... -
4.3-10 female Straight RF Connector for 7/8″ Feeder cable Screw Type
1. The 4.3-10 connector system is designed to meet the latest requirements of mobile network equipment to connect the RRU to the antenna. 2. The 4.3-10 connector system is better than 7/16 connectors in terms of size, robustness, performance, and other parameters, separate electrical and mechanical components yield very stable PIM performance, which results in a lower coupling torque. These series of connectors are compact sizes, best electrical performance, low PIM and coupling torque as Wel... -
Low PIM 7/16 DIN Male to 4.3-10 Male Adapter
Adaptors manufactured by Telsto Development Co., Limited are in a wide range of various configurations like within series or between series, straight or angled design and some with panel mount features. They are classified according its typical intended applications of which each require its specific properties. There are four major groups which are identified by means of a color code in this catalogue: standard, precision, low passive inter-modulation(PIM)and quick-mate adaptors. Telsto RF A... -
Hybrid Combiner 2×2
Features ◆ Wide Frequency Band 698-4000MHz ◆ 2G/3G/4G/LTE/5G Coverage ◆ Low Passive Inter-modulation ◆ Low VSWR & Insertion Loss ◆ High Isolation, Indoor & Outdoor, IP65 ◆ Widely used for In-building Solutions ◆ High Directivity / Isolation ◆ Power Rating 300W per input, High Reliability ◆ Low Insertion Loss, Low VSWR, Low PIM(IM3) Electrical Characteristics Characteristics Impedance 50 Ohm Frequency Range 698-2700 MHz Max Power Capacity 300w Isolation ≥27 dB Loss ... -
Stainless Steel Banding Buckle
Telsto Stainless Steel Banding Buckle are most popular type which are widely used for petro- chemical, pipe insulation, bridges, pipelines, cables, traffic signs, billboards, electric signs, cable trays, etc. bundled applications in different industries, it is used with stainless steel straps and banding tools. Type Part Number Width Thickness (mm) Package (PCS/BOX) Inches mm Teeth Stainless Steel Buckle TEL-BK6.4 1/4 6.4 0.5 100 TEL-BK10 3/8 9.5... -
Base station RF Coaxial DIN 7/16 Female telecom connector for 7/8″ leaky Cable for communication
7/16 Din connector is specially designed for outdoor base stations in mobile communication (GSM, CDMA, 3G, 4G) systems, featuring high power, low loss, high operating voltage, perfect waterproof performance and applicable to various environments. It is easy to install and provides reliable connection. 7-16(DIN) coaxial connectors-high-quality coaxial connectors with low attenuation and inter-modulation.Transmission of medium to high power with radio transmitters and low PIM transmission of re... -
2 Watt Din Type Coaxial Dummy Load Termination
RF load / termination (also known as a dummy load) is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, defense / military, etc. which are specifically made ready for quick shipment. Our coaxial radio frequency load termination is manufactured in a RF load design with N/Din connectors. Termination loads absorb RF & microwave energy and are commonly used as ... -
N Female connector for 1/2″ flexible RF cable
N Connector is a threaded RF Connector used for linking with coaxial cable. It has both 50 Ohm and standard 75 Ohm impedance. N Connectors Applications Antennas, Base Stations, Broadcast, WLAN, Cable Assemblies, Cellular, Components test & Instrumentation equipment, Microwave Radio, MIL-Afro PCS, Radar, Radio equipment, Satcom, Surge Protection. With the exception of the inner contacts, the interface dimensions of the 75 ohm connector have been traditionally identical to that of the 50 oh... -
1/2″super flex Jumper cable DIN 7/16 male
Our Services What we could do for you are: 1) Factory sell directly 2) Long-term,strong and steady supplying ability 3) Delivery time: 3-5 working days 4) Package,brand or other designs per your requirements 5) Strong sales promotion policy 6) Ex-factory price and competitive price 7) We can provide you a good service 8) Replying you asap Packing Reference