Products
Products
-
1/2″ RF Cable Assemblies / Assembly
Applicable for connecting feeder cables with 8TS equipment and antenna, unnecessary of additional waterproof measures, such as waterproof gel or tape, meets waterproof standard IP68. Standard lengths: 0.5m, 1m, 1.5m, 2m, 3m, customer special requirements on jumper length could be satisfied. Characteristics & Applications Electrical Spec. Vswr ≤ 1.15 (800MHz-3GHz) Dielectric withstanding voltage ≥2500V Dielectric resistance ≥5000MΩ(500V DC) Pim3 ≤ -155dBc@2 x 20W Operating tem... -
Telsto Dummy load
Termination loads absorb RF & microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multi port microwave device such as articulator and directional couple to make these ports which are not involved in the measurement be terminated in their characteristic impedance in order to ensure an accurate measurement. Termination loads, also call dummy loads, are the passive 1-port interconnect devices, which provide a resistive p... -
Hansen Brand Coaxial Feeder Cable 7/8” LOW LOSS Type 3A01170028
Construction inner conductor material smooth copper tube dia. 9.30±0.10 mm insulation material physically foamed PE dia. 22.40±0.40 mm outer conductor material ring corrugated copper diameter 25.60±0.30 mm jacket material PE or fire retardant PE diameter 27.90±0.20 mm mechanical properties bending radius single repeated moving 127 mm 254 mm 500 mm pulling strength 1590 N crush resistance 1.4 kg/mm recommended temperature PE jacket store -70±85°C installation -40... -
Low PIM 7/16 DIN Male to 4.3-10 Female Adapter
Telsto RF adapter is a product widely used in cellular base stations, distributed antenna systems (DAS) and small cell applications. Its operating frequency range is DC-3 GHz, with excellent VSWR performance and low passive intermodulation (low PIM3 ≤ – 155dBc (2 × 20W））。 These characteristics make it a choice of high performance and reliability, which can help users improve the quality and reliability of wireless communication systems. As an RF adapter, Telsto RF adapter has a wide... -
MIMO Omni Celling In building Antenna
Feature: Exquisite appearance Good impact resistance, waterproof and anti corrosion ability Standard installing mount kits packages for holding pole Optimized dimension Designed with wide band technology, medium gain, low standing wave ratio Application: GSM/ CDMA/ DCS/ PCS/ 3G/ 4G/ LTE/ WLAN/ Wi-Fi system Follow these procedures to install antenna with holding pole, adjust tilt angle of antenna, tighten bolts, screws and nuts. (1) L shape mounting kits should be aligned antenna bolt, put on ... -
SS 304 Ear Lock Stainless Steel Buckle for Banding Strap
Feature Telsto Power splitters are in 2, 3 and 4 ways, use stripline and cavity craftwork with silver plated, metal conductors in aluminum housings, with excellent input VSWR, high power ratings, low PIM and very low losses. Excellent design techniques allow bandwidths that extend from 698 to 2700 MHz in housing of convenient length. Cavity splitters are frequently employed in in-building wireless coverage and outdoor distribution systems. because they are virtually indestructible, low loss a... -
RF Coaxial N Male to N Male Adapter Connector
Telsto RF connector is a connector widely used in the field of wireless communication. Its operating frequency range is DC-3 GHz. It has excellent VSWR performance and low passive intermodulation. It has very stable signal transmission and excellent communication quality. Therefore, this connector is very suitable for cellular base stations, distributed antenna systems (DAS) and cell applications to ensure high-speed and efficient communication and data transmission. At the same time, the co... -
Wide-Band Directional Coupler 698-2700MHz N
Telsto Wide band Directional couplers provide flat coupling of one signal path to another in one direction only (known as directive). They commonly consist of an auxiliary line coupling electrically to a main line. One end of the auxiliary line is permanently fitted with a matched termination. Directive (the difference between coupling in one direction compared to the other) is approximately 20 dB for couplers, Directional couplers are used whenever part of a signal needs to be separated off ... -
1/2″ super flexible jumper cable DIN 7/16 to DIN 7/16 3M
Applicable for connecting feeder cables with 8TS equipment and antenna, unnecessary of additional waterproof measures, such as waterproof gel or tape, meets waterproof standard IP68. Standard lengths: 0.5m, 1m, 1.5m, 2m, 3m, customer special requirements on jumper length could be satisfied. Characteristics & Applications Electrical Spec. Vswr ≤ 1.15 (800MHz-3GHz) Dielectric withstanding voltage ≥2500V Dielectric resistance ≥5000MΩ(500V DC) Pim3 ≤ -155dBc@2 x 20W Operating tem... -
Telsto RF load terminations
Telsto RF load terminations are constructed of an aluminum finned heat sink, brass nickel plated or stainless steel,they are of good low PIM performance. Termination loads absorb RF & microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multi port microwave device such as circulation and directional couple to make these ports which are not involved in the measurement be terminated in their characteristic impedance in o... -
4.3-10 female Straight RF Connector for 7/8″ Feeder cable Screw Type
1. The 4.3-10 connector system is designed to meet the latest requirements of mobile network equipment to connect the RRU to the antenna. 2. The 4.3-10 connector system is better than 7/16 connectors in terms of size, robustness, performance, and other parameters, separate electrical and mechanical components yield very stable PIM performance, which results in a lower coupling torque. These series of connectors are compact sizes, best electrical performance, low PIM and coupling torque as Wel... -
Low PIM 7/16 DIN Male to 4.3-10 Male Adapter
Adaptors manufactured by Telsto Development Co., Limited are in a wide range of various configurations like within series or between series, straight or angled design and some with panel mount features. They are classified according its typical intended applications of which each require its specific properties. There are four major groups which are identified by means of a color code in this catalogue: standard, precision, low passive inter-modulation(PIM)and quick-mate adaptors. Telsto RF A...