Products
Products
-
Gel Seal Closure For Coax In-Line Connection Of 1/2″ To 1-5/8″
Gel seal closure is a plastic weatherproofing enclosure which is designed to quickly seal the coax connector between 1/2″ jumper cable and 1-5/8″ feeder cable. It is usually used on wireless cell tower cabling system. It is not a simple plastic enclosure. The innovative built-in soft gel make it IP68 waterproof rate, and ensure a perfect sealing for outdoor coax connectors. Specs: – Quick install, just take seconds. – Easy install, no tape, no mastic and no tool needed... -
Gel seal closure, 1/2″ to antenna, short version
Gel seal closure, is a new kind of weatherproofing kit. It is designed to quickly seal the antenna connectors and feeder connectors in cellular sites. This closure contains an innovative gel material and provides an efficient block against moisture & salt mist. Gel seal closures have pass strict tests from labs and achieve good feedback from long-term practical application. The ease of installation and reusable feature makes them a cost-effective solution. Full sizes of gel seal closures:... -
Weather shield closures waterproof
Telsto series gel seal closure is a new kind of weatherproofing solutions designed to protect RF connections at wireless communication towers, for instance, 3G or 4G, LTE cell sites where RF connections are getting denser than ever before and the traditional weatherproofing solutions, tapes and mastic are difficult to use in such crowded places. Telsto series closures are re-enter able, reusable and tool-less, making it time-saving, cost-effective and installer-friendly weatherproofing soluti... -
Weatherproofing Clamp Shell slim closures
The Telsto gel closure is a weatherproofing system for sealing coaxial cable jumper-to-feeder, jumper-to-antenna and grounding kit connectors exposed to the outside environment. The housing contains an innovative gel material and provides an efficient moisture block effectively water-proofing the connectors. The ease of installation and the long term protection makes it a reliable and cost effective sealing solution for outside plant cables and connectors. Telsto Gel seal closure (Weather shi... -
Weather shields clamp shell
Telsto Gel seal closure (Weather shields) is a weatherproofing system for sealing coaxial cable jumper-to-feeder, jumper-to-antenna and grounding kit connectors exposed to the outside environment. The housing contains an innovative gel material and provides an efficient moisture block effectively water-proofing the connectors. The ease of installation and the long term protection makes it a reliable and cost effective sealing solution for outside plant cables and connectors. *IP rating 68 *Ce... -
Gel Seal Closure for 1/2″jumper to 4.3-10 connector
Telsto gel seal weather proofing clam shell is a new kind of weatherproofing enclosure which contains a highly compliant sealing gel that conforms to the entire connection rather than a perimeter seal, leading to a highly reliable weather protection performance. In addition, the enclosure retains all the advantages of earlier closures – quick and easy to install, no tools required, and reusable-but the SLIM design better suited for crowded RF connection points of new emerging cell sites with... -
Telsto entry boots cable entry feeder window
Telsto entry boots are designed to be fitted onto entry panels which are installed on wall/roof. Entry boots must be fitted with a cushion to hold the coax in place. Entry boot can be used on panels to create a neat and clean installation. *Various types *Total sealing *Easy installation *Flexible combinations *Environment friendly The cable entry, which is used for the waterproof when feeder enters the machine room, is composed of entrance wall / roof feed through plate and cable e... -
Telsto Cable Feeder Window
Telsto entry boots are designed to be fitted onto entry panels which are installed on wall/roof. Entry boots must be fitted with a cushion to hold the coax in place. Entry boot can be used on panels to create a neat and clean installation. *Various types *Total sealing *Easy installation *Flexible combinations *Environment friendly Apply to all sorts of cable into the engine room, thus play a role in sealing, apply to mobile base station, exchange, microwave station etc. kinds of engine room.... -
Telsto Clamp Port Solutions 1/2’’cable
Boot Assembly Cushion provides versatility in any application, allowing a single cushion to mount a wide range of cable sizes, reducing material and installation costs. These cushions are constructed of UV-resistant EPDM rubber, allowing for proper functionality in extreme temperature and harsh environmental conditions. Barrel cushions are available in multiple sizes to accommodate industry demands for fiber, power, elliptical and coaxial cable requirements. The unique design allows the cushi... -
Telsto Boot Assemblies 4 inch with 7/8’’ holes
Boot Assemblies · 1. Material unaffected by ozone,sunlight or aging · 2. EPDM rubber · 3. Includes two 304 stainless steel hose clamps · 4. One piece design for easy installation · 5. Inserts and plugs sold separately Port Size #of Ports Port Layout 4’’ 1 1×1 4’’ 2 1×2 Introduction: Each Assembly cable entry boot include : 1. A outer boot. (EPDM Rubber) 2. A select able inner cushion insert. (EPDM Rubber) 3. Two hose clamp. (Stainless steel) T... -
Aluminum Entry Panels with 4” Ports
Telsto Entry Panels runs feeder cable to enter buildings and shelters. These seals support the coax at the entry point and prevent moisture from entering the building. Each boot assembly must be fitted with a cushion to hold the coax in place. Entry plates are offered with a flexible selection of holes combination and plate sizes to match your exact application. Application Apply to all sorts of cable into the engine room, thus play a role in sealing, apply to mobile base station, exchange,... -
Aluminum Entry Panels with 4” Ports
Telsto Entry Panels runs feeder cable to enter buildings and shelters. These seals support the coax at the entry point and prevent moisture from entering the building. Each boot assembly must be fitted with a cushion to hold the coax in place. Entry plates are offered with a flexible selection of holes combination and plate sizes to match your exact application. Application Apply to all sorts of cable into the engine room, thus play a role in sealing, apply to mobile base station, exchange, m...