Products
Products
-
Cold Shrink Tube 1/2″ Cable to Antenna
Cold Shrink Tube is kind of new cable accessories which is prefabricated by adopting high elasticity silicone rubber. This product is provided with special dielectric property, the performance of resistance against tracking and corrosion are strong, the constant shrinkable force, and it will not be insulation dead angle because the cable is banded. When it is installed at locale, it need not the heat source and special tool, so it improves the safety and reliability of product. Features Made ... -
Cold Shrink tube for antenna to 1/2’’ cable
Cold shrink termination kits is a fast and easy way to weatherproof a connection. Simply position the pre- expanded tubing over the connection that you are protecting and pull the rip cord. The tubing compresses to form a weatherproof seal. All without heat, special tools or a time-consuming installation procedure. And it’s easily removed when system maintenance is required. Cold shrink termination kits is designed to seal the connection between the base station antenna and the 1/2̸... -
Silicone Rubber Cold Shrink Tube 4.3/10 Connector to 1/2″ Jumper
Cold shrink tube is a specially formulated tubular rubber sleeve pre- expanded on a removable plastic cylinder for easy installation, it does not require heat to shrink. You just need to pull the plastic cord, then the silicone rubber tubing will shrink rapidly and grip around the cable tightly, providing a reliable, long-term sealing and protection to connectors. In certain applications, a foam tape will be needed for smaller cable diameter cannot be covered with the tube range, the foam tap... -
Telsto Silicone Cold Shrink Tube
Cold shrinkable tube is a reliable and fast solution to protect a connection. Simply position the pre-expanded tubing over the connection and pull out the rip cord. The tubing shrinks immediately without heat and seals the connection firmly. Features: 1. Simple installation, no tool needed 2. No torches or heat required. 3. Good heat resistance 4. Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure 5. Excellent wet electrical properties 6. Waterp... -
EPDM cold shrink tubes
Telsto EPDM Cold Shrink Tubing are a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this per-stretched condition. The core is removed after the tube has been positioned for installation over an in-line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphur. Features : 1. Si... -
Silicone Rubber Cold Shrink Tube 7/16 DIN to 1/2″ Jumper Cable
Cold shrink tube is a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. Cold shrink cable joints is supplied for field installation in this per-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. Cold shrink cable joints is made of EPDM rubber, which contains no chlorides or sulphur. Various... -
Telsto Cold Shrink tube for 3/8’’Cable
Cold shrink tube is a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. Cold shrink cable joints is supplied for field installation in this per-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. Cold shrink cable joints is made of EPDM rubber, which contains no chlorides or sulphur. Various... -
Telsto Cold Shrink tube for 8.0-21.34mm Cable
Cold shrink tube is a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. Cold shrink cable joints is supplied for field installation in this per-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. Cold shrink cable joints is made of EPDM rubber, which contains no chlorides or sulphur. Various... -
TEL-CST-28-204
Cold shrink tube is a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. Cold shrink cable joints is supplied for field installation in this per-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. Cold shrink cable joints is made of EPDM rubber, which contains no chlorides or sulphur. Various... -
TEL-CST-40-5
Features/Benefits ● Spiral technology makes the products easy to install and mistakes nearly impossible ● The products enable a uniform and superb assembly every time ● No fire needed-less tools, less effort ● Silicon material is very durable ● Integrated structure and less components General Specifications Application For antenna, jumper cable Application 13.0-34.0mm cable Material Silicone Rubber Color Black Rubber tube 1p... -
TEL-SCST-28-110
Cold shrink tube is a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. Cold shrink cable joints is supplied for field installation in this per-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. Cold shrink cable joints is made of EPDM rubber, which contains no chlorides or sulphur. Various... -
Telsto Cold Shrink Tube for 13.0-25.4mm Cable
Cold shrink tube is a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. Cold shrink cable joints is supplied for field installation in this per-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. Cold shrink cable joints is made of EPDM rubber, which contains no chlorides or sulphur. Various...