N Female to Din Male Adapter
Telsto RF Adapter has an operational frequency range of DC-6 GHz, offers excellent VSWR performance and Low Passive Inter modulation. This makes it ideally suited for use in cellular base stations, distributed antenna systems (DAS) and small cell applications.
7 16 DIN Male to N Female Adapter is a high power RF connector widely used in antenna systems or base stations that supplies better performances concerning interference and intermodulation rejection.
| Frequency Range | DC-6GHz |
| Product name | 7 16 DIN Male to N Female adapter |
| VSWR | ≤1.15 |
| Impedance | 50ohm |
| Power | 500W |
| Material | Copper |
| Temperature(℃) | -30~+65 |
| Dregree of Protection | IP65 |
| Size(mm) | 21*47 |
| Degree of protection | IP65 |
| Package | Single box or bubble bag |
| PIM(IM3) | ≤-150dBc@2×43dBm |
|
Product |
Description | Part No. |
|
RF Adapter |
4.3-10 Female to Din Female Adapter | TEL-4310F.DINF-AT |
| 4.3-10 Female to Din Male Adapter | TEL-4310F.DINM-AT | |
| 4.3-10 Female to N Male Adapter | TEL-4310F.NM-AT | |
| 4.3-10 Male to Din Female Adapter | TEL-4310M.DINF-AT | |
| 4.3-10 Male to Din Male Adapter | TEL-4310M.DINM-AT | |
| 4.3-10 Male to N Female Adapter | TEL-4310M.NF-AT | |
| Din Female to Din Male Right Angle Adapter | TEL-DINF.DINMA-AT | |
| N Female to Din Male Adapter | TEL-NF.DINM-AT | |
| N Female to N Female Adapter | TEL-NF.NF-AT | |
| N Male to Din Female Adapter | TEL-NM.DINF-AT | |
| N Male to Din Male Adapter | TEL-NM.DINM-AT | |
| N Male to N Female Adapter | TEL-NM.NF-AT | |
| N Male to N Male Right Angle Adapter | TEL-NM.NMA.AT | |
| N Male to N Male Adapter | TEL-NM.NM-AT | |
| 4.3-10 Female to 4.3-10 Male Right Angle Adapter | TEL-4310F.4310MA-AT | |
| DIN Female to Din Male Right Angle RF Adapter | TEL-DINF.DINMA-AT | |
| N Female Right Angle to N Female RF Adapter | TEL-NFA.NF-AT | |
| N Male to 4.3-10 Female Adapter | TEL-NM.4310F-AT | |
| N Male to N Female Right Angle Adapter | TEL-NM.NFA-AT |
Service
We are an enterprise committed to providing customers with high-quality services and products. Our service covers a wide range of electronic products and accessories.
Our quality control department and third-party inspection standards ensure that all products we supply have undergone strict inspection before shipment. For most products, such as shaft jumpers and passive components, we have conducted 100% testing to ensure that their performance reaches the highest standard.
In order to let customers better understand our products, we provide free samples. In addition, we are also pleased to support customers to develop new products together and help them develop local markets. Our customized service can provide customized solutions according to the specific requirements of customers.
Our company has always been committed to providing customers with high-quality products and services and establishing long-term partnership with customers. Our goal is to become your trusted partner and provide you with comprehensive support and services in all fields.
If you are looking for a reliable supplier, we believe that our products and services will meet your needs. Please contact our customer service team to learn more about our products and services
Related
Model: TEL-NF.DINM-AT
Description
N Female to DIN 7/16 Male Adapter
| Material and Plating | |
| Center contact | Brass / Silver Plating |
| Insulator | PTFE |
| Body & Outer Conductor | Brass / alloy plated with tri-alloy |
| Gasket | Silicon Rubber |
| Electrical Characteristics | |
| Characteristics Impedance | 50 Ohm |
| Frequency Range | DC~3 GHz |
| Insulation Resistance | ≥5000MΩ |
| Dielectric Strength | ≥2500 V rms |
| Center contact resistance | ≤0.4 mΩ |
| Outer contact resistance | ≤1.55 mΩ |
| Insertion Loss | ≤0.15dB@3GHz |
| VSWR | ≤1.1@-3.0GHz |
| Temperature range | -40~85℃ |
| PIM dBc(2×20W) | ≤-160 dBc(2×20W) |
| Waterproof | IP67 |
Installation Instructions of N or 7 / 16 or 4310 1 / 2″ super flexible cable
Structure of connector: ( Fig1 )
A. front nut
B. back nut
C. gasket
Stripping dimensions is as shown by diagram ( Fig2 ), attention should be paid while stripping:
1. The end surface of inner conductor should be chamfered.
2. Remove impurities such as copper scale and burr on the end surface of the cable.
Assembling the sealing part: Screw the sealing part in along the outer conductor of the cable as shown by the diagram ( Fig3).
Assembling the back nut (Fig3).
Combine the front and back nut by screwing as shown by diagram ( Figs( 5)
1. Before screwing, smear a layer of lubricating grease on the o-ring.
2. Keep the back nut and the cable motionless, Screw on main shell body on back shell body. Screw down main shell body of back shell body using monkey wrench. Assembling is finished.
