High quality 4.3-10 MINI DIN Connector for 1/2 Super flexible Cable
Coaxial connector adapter are used between equipment and equipment, equipment and comportment, parts and components to achieve the mechanical performance of the various parts of the transmission of electrical signals, and can be used for scientific research, electromagnetic confrontation, aerospace, precision measurement and other microwave fields.
We can provide research and development, design, field mapping, routing and structural optimization to provide the full range of solutions and services based on customers special requirements.
Features
1. Good shielding performance
2. Low VSWR; Low attenuation
3. Low PIM
4. High Reliability
5. Economic price
Related
Model: TEL-4310M.12S-RFC
Description
4.3-10 Male connector for 1/2″ Superflexible RF cable
| Material and Plating | |
| Center contact | Brass / Silver Plating |
| Insulator | PTFE |
| Body & Outer Conductor | Brass / alloy plated with tri-alloy |
| Gasket | Silicon Rubber |
| Electrical Characteristics | |
| Characteristics Impedance | 50 Ohm |
| Frequency Range | DC~3 GHz |
| Insulation Resistance | ≥5000MΩ |
| Dielectric Strength | ≥2500 V rms |
| Center contact resistance | ≤1.0 mΩ |
| Outer contact resistance | ≤0.25 mΩ |
| Insertion Loss | ≤0.12dB@3GHz |
| VSWR | ≤1.1@3.0GHz |
| Temperature range | -40~85℃ |
| PIM dBc(2×20W) | ≤-160 dBc(2×20W) |
| Waterproof | IP67 |
Shanghai Qikun Communication Technology Co., Ltd. has comprehensive technical capabilities and industry experience, is familiar with the market environment and customer needs, and can flexibly cope with various technical and market challenges. At the same time, we have established long-term cooperative relations with many well-known manufacturers at home and abroad to ensure the reliability and progressiveness of the technical solutions.
Our service range is extensive, covering all segments of the communication field, including communication engineering, data center, Internet services, etc., and can provide customers in different fields with comprehensive technical services. We always adhere to the principle of customer first, create greater value for customers, grow together with customers and create brilliance
Installation Instructions of N or 7 / 16 or 4310 1 / 2″ super flexible cable
Structure of connector: ( Fig1 )
A. front nut
B. back nut
C. gasket
Stripping dimensions is as shown by diagram ( Fig2 ), attention should be paid while stripping:
1. The end surface of inner conductor should be chamfered.
2. Remove impurities such as copper scale and burr on the end surface of the cable.
Assembling the sealing part: Screw the sealing part in along the outer conductor of the cable as shown by the diagram ( Fig3).
Assembling the back nut (Fig3).
Combine the front and back nut by screwing as shown by diagram ( Figs( 5)
1. Before screwing, smear a layer of lubricating grease on the o-ring.
2. Keep the back nut and the cable motionless, Screw on main shell body on back shell body. Screw down main shell body of back shell body using monkey wrench. Assembling is finished.
