Aluminum Entry Panel 2×2

Telsto Entry Panels runs feeder cable to enter buildings and shelters. These seals support the coax at the entry point and prevent moisture from entering the building. Each boot assembly must be fitted with a cushion to hold the coax in place. Entry plates are offered with a flexible selection of holes combination and plate sizes to match your exact application.

Application

Apply to all sorts of cable into the engine room, thus play a role in sealing, apply to mobile base station, exchange, microwave station etc. kinds of engine room.

Material:

1, metal parts: high quality aluminum alloy plate or stainless steel

2, sealing element: top-quality rubber that high and low temperature resistant non-deformed and anti-aging capability

Feature:

1, adopt -55°C~+60°C temperature changing.

2, resistant to corrosion of corrosive gas, air, acid rain.

3, prevent the rain and outside moisture into the engine room through the gap between cable and sealing element or the gap between HLKC and wall. The grade of seal performance can reach IP65.

4, shield electromagnetism disturbing

5, provide all sorts of different types sealing element form a whole sealing part, meet different OD cable through a HLKC into the room

Installation instructions:

a. reserved a suitable hole, the detailed dimension refer to the product specification.

b. fix the seal plate into the reserved hole by anchoring.

c. put waterproof silica gel around the seal plate, the sealing effect will be better.