1. The 4.3-10 connector system is designed to meet the latest requirements of mobile network equipment, to connect the RRU to the antenna.
2. The 4.3-10 connector system is better than 7/16 connectors in terms of size, robustness, performance, and other parameters, separate electrical and mechanical components yield very stable PIM performance, which results in a lower coupling torque. These series of connectors are compact sizes, best electrical performance, low PIM and coupling torque as well as easy installation, these designs provide excellent VSWR performance up to 6.0 GHz.
1. 100% PIM tested
2. Ideal for applications requiring low PIM and low attenuation
3. 50 Ohm nominal impedance
4. IP-68 compliant in the unrated condition
5. Frequency range DC to 6GHz
1. Distributed Antenna System (DAS)
2. Base Stations
3. Wireless Infrastructure
4. Telecom
5. Filters and Combiners
● 4.3-10 VSWR & low PIM test results for LTE & Mobile
● Screw Type
● Push-Pull Type
● Hand Screw Type
● Outstanding PIM and VSWR test results confirm the 4.3-10 connector system an excellent performance.
Given also the other mechanical advantages such as size and lower coupling torque, the 4.3-10 connector system turns out to be a perfect fit for the mobile communication market.
1. Reply your enquiry in 24 working hours.
2. Customized design is available. OEM &ODM are welcome.
3. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs.
4. Quick delivery time for decent order.
5. Experienced in doing business with large listed companies.
6. Free Samples can be provided.
7. 100% Trade Assurance of payment & quality.
Model: TEL-4310M.78-RFC
Description
4.3-10 Male connector for 7/8″ flexible RF cable
Material and Plating | |
Center contact | Brass / Silver Plating |
Insulator | PTFE |
Body & Outer Conductor | Brass / alloy plated with tri-alloy |
Gasket | Silicon Rubber |
Electrical Characteristics | |
Characteristics Impedance | 50 Ohm |
Frequency Range | DC~3 GHz |
Insulation Resistance | ≥5000MΩ |
Dielectric Strength | ≥2500 V rms |
Center contact resistance | ≤1.0 mΩ |
Outer contact resistance | ≤1.0 mΩ |
Insertion Loss | ≤0.1dB@3GHz |
VSWR | ≤1.15@-3.0GHz |
Temperature range | -40~85℃ |
PIM dBc(2×20W) | ≤-160 dBc(2×20W) |
Waterproof | IP67 |
Installation Instructions of N or 7 / 16 or 4310 1 / 2″ super flexible cable
Structure of connector: ( Fig1 )
A. front nut
B. back nut
C. gasket
Stripping dimensions is as shown by diagram ( Fig2 ), attention should be paid while stripping:
1. The end surface of inner conductor should be chamfered.
2. Remove impurities such as copper scale and burr on the end surface of the cable.
Assembling the sealing part: Screw the sealing part in along the outer conductor of the cable as shown by the diagram ( Fig3).
Assembling the back nut (Fig3).
Combine the front and back nut by screwing as shown by diagram ( Figs( 5)
1. Before screwing, smear a layer of lubricating grease on the o-ring.
2. Keep the back nut and the cable motionless, Screw on main shell body on back shell body. Screw down main shell body of back shell body using monkey wrench. Assembling is finished.